23
5.8 - Spinnaker Halyard Takeup Elastic
Tie the metal ring to one end of the spinnaker halyard takeaway
elastic found in the spinnaker pack using a knot-on-knot.
a)
Feed the other end of the spinnaker halyard takeaway
elastic through the small ring on the front of the mast
above the spreaders.
b)
Pass the end on the spinnaker halyard takeaway
elastic down the mast and tie it through the hole in the
mast step heel.
Make sure the elastic is tight enough that the
ring on the end of it is tight against the small
ring on the mast.
c)
To Next Page
Loading...