RS Toura - 6.1 - Fitting the boom

32
6.1 - Fitting the boom
To complete this section, you will need:
• The boom
• The gnav bar
Connect the gnav bar to the slider at the front
end of the boom.
Open the drop nose pin then connect the front of the boom to the gooseneck on the
mast.
Connect the upper end of the gnav bar to the bracket on the mast above the
gooseneck.
It is vital that the gnav toggle is inserted as shown above. Failure to do so will
result in damage to the strut assembly.
a)
b)
c)