RS Toura - 6.3 - Rigging The Mainsheet

34
6.3 - Rigging The Mainsheet
Find the 40mm block with a becket and the mainsheet strop from the
rope pack.
Take the mainsheet strop and fold it in half to form a loop.
Pass this loop through the base of the block.
Pass the two tails of the rope back through the loop, making sure
the block is in the middle.
Pass each tail of the rope through the
plasticttingsontheaftsideofthethwartandtie
a stopper knot.
Rigging the Mainsheet Strop
a)
b)
c)