RS Toura - 9.1 - Rudder

53
LOCKING GUDGEON
- PUSH TO RELEASE
Intherudderpackyouwillndtherudder,tiller,tillerextension
andtwosmallatheadscrews.
Insert the tiller into the stock. Line up the holes,
making sure that the tiller extension joint is on the top of the
tiller, Then attach using the screws provided.
Attach the tiller extension.
a)
b)
To put the rudder down -
1. Lift the tiller slightly to unlock the blade.
2. Push the tiller aft until the blade is fully lowered (it will normally ‘clunk’ into the front of
the rudder stock).
3. Pushthetillerrmlydownto‘lock’theblade.
9.1 - Rudder