VW2106 Vibrating Wire Readout Manual
Added revision table, section 4.6 instruction 4
“thermistor” changed to “sensor”, updated
column heading in Table 3-3 from “Thermistor
Type” to “Sensor Type”.
Updated Single Field Instrument Connection
instructions to include push post terminals,
Table 4-1 updated for clarity, added Section
4.2 Single Field Instrument Connection –
Older Models, highlighted new features in
introduction, all figures updated.
References to Multi Host software replaced
with RST Readout Host Software; added
entire inside lid decal to introduction.
Broken link in Section 3.5 corrected.