RTI VSW-51 - Page 22

Compact Scaler Switcher Set
17
Command
Function
Feedback Example
@RES:OUT 01
1920x1080P60!
@CFG:AUTOSWITCH
ON!
@VOL:SRC MUTE!
@VOL:MIC MUTE!
@VOL:VGA MUTE!
@VOL:DPA MUTE!
@CFG:DPA EMB!
#CFG:FWUPDAT
E!
Firmware update
@CFG:UPDATE FW!
Signal Switching
#RAV:[XX]AV01!
Switch Input [XX] AV signal to output
01. [XX] = 01 - HDMI1;02 - HDMI2; 03 -
HDMI3; 04 - DisplayPort; 05 – VGA
@RAV:VIDEO 03 TO
OUT 01!
@RAV:AUDIO 03 TO
OUT 01!"
#RPT:01?!
Report the input channel on output 01.
@RAV:VIDEO 03 TO
OUT 01!
@RAV:AUDIO 03 TO
OUT 01!"
#CFG:INP05VGA
!
Set the signal format to VGA for 5-VGA
input.
@CFG:INP 05 VGA!
#CFG:INP05YPB
PR!
Set the signal format to YPbPr for
5-VGA input.
@CFG:INP 05 YPBPR!
#CFG:INP05YCVI
DEO!
Set the signal format to AV(C-video) for
5-VGA input.
@CFG:INP 05
YCVIDEO!
#CFG:INP05TYP
E?!
Report signal format of VGA input.
@CFG:INP 05 VGA!
@CFG:INP 05 YPBPR!
@CFG:INP 05
YCVIDEO!
#CFG:VGAAUTO
ADJ!
Auto adjust of VGA.
@CFG:VGA AUTO
ADJUST!
#CFG:AUTOSWI
Enable auto-switching.
@CFG:AUTOSWITCH