RTI VSW-51 - Page 26

Compact Scaler Switcher Set
21
Command
Function
Feedback Example
#EDD:MANAGE!
EDID management, copy the best
resolution data of one output to HDMI
input.
@CFG:OUT 01
RES1080P!
@EDID:MANAGE
1920x1080P60!
Serial Control Mode
#CFG:OUT01RS2
32M1!
Enable serial control mode 1: control
Scaler & far-end from local RS232.
@CFG:OUT 01 RS232
M1!
#CFG:OUT01RS2
32M2!
Enable serial control mode 2: control
Scaler from local RS232 and far-end).
@CFG:OUT 01 RS232
M2!
OSD Control
#OSD:MENU!
MENU button (enter OSD).
@OSD:MENU!
#OSD:EXIT!
EXIT button (exit OSD).
@OSD:EXIT!
#OSD:OK!
OK for OSD selection.
@OSD:OK!
#OSD:UP!
UP button.
@OSD:UP!
#OSD:DN!
DOWN button.
@OSD:DN!
#OSD:LT!
LEFT button.
@OSD:LT!
#OSD:RT!
RIGHT button.
@OSD:RT!
Screen Output Adjusting
#ADJ:ENABLE!
Enable screen output adjusting.
@ADJ:ENABLED!
#ADJ:DISABLE!
Disable screen output adjusting.
@ADJ:DISABLED!
#ADJ:POSLT!
Move the image to left.
@ADJ:POS LEFT!
#ADJ:POSRT!
Move the image to right.
@ADJ:POS RIGHT!
#ADJ:POSUP!
Move the image up.
@ADJ:POS UP!
#ADJ:POSDN!
Move the image down.
@ADJ:POS DOWN!
#ADJ:WDTPLUS!
Stretch left from left side (increase
image width).
@ADJ:WDT PLUS!
#ADJ:WDTMINU
S!
Pull right from left side (decrease image
width).
@ADJ:WDT MINUS!
#ADJ:HGTMINUS
!
Stretch upwards from bottom side
(decrease image height).
@ADJ:HGT MINUS!
#ADJ:HGTPLUS!
Stretch downwards from bottom side
(increase image height).
@ADJ:HGT PLUS!