RTI VSW-51 - OSD Menu Control

Compact Scaler Switcher Set
23
Command
Function
Feedback Example
#CEC:EXIT!
Exit command.
@CEC:EXIT!
#CEC:SOURCEO
N!
Source power on.
@CEC:SOURCE ON!
#CEC:SOURCEO
FF!
Source power off.
@CEC:SOURCE OFF!
#CEC:DISPLAYO
N!
Display power on.
@CEC:DISPLAY ON!
#CEC:DISPLAYO
FF!
Display power off.
@CEC:DISPLAY OFF!
Note:
 Screen output adjusting avails only when the screen output adjusting is on. Send
command “#ADJ:ENABLE!” to turn on.
 Under HDCP ON or HDCP OFF mode, the video signal can be switched to HDMI
and HDBaseT output seamlessly, while sending “#HDP:ACTIVE!” to set as HDCP
Active mode, the video signal can’t support seamless switching.
 All input and output number MUST be in 2 Digits (e.g. Input channel 1 must be
wrote as 01)