GS-2108C User Manual
Publication date: April, 2008
Revision A4
115
Function name:
LACP System Priority
Function description:
It is used to set the priority part of the LACP system ID. LACP will only
aggregate together the ports whose peer link partners are all on a single
system. Each system supports LACP will be assigned a globally unique
System Identifier for this purpose. A system ID is a 64-bit field comprising a
48-bit MAC Address and 16-bit priority value. The System Priority can be set
by the user. Its range is from 1 to 65535. Default: 32768
Fig.3-55
To Next Page
Loading...
Need help?
General
