GS-2108C User Manual
Publication date: April, 2008
Revision A4
72
happening in real networking environment. After any setting you done, please
click the <Apply> button to have the setting taken effect. When looping has
already happened, we suggest that the users could choose the looping port as
“Enable” in advance. And then tick the check box (;) of the Action. That will
get the better result for Looping removing.
Parameter description:
Port No:
Display the port number. The number is 1 – 8.
State – Enable / Disable:
When Port No is chosen, and enable port' s Loop detection, the port can
detect loop happens. When Port-No is chosen, enable port' s Loop
detection, and the port detects loop happen, port will be Locked. If Loop
did not happen, port maintains Unlocked. The default is Disable.
Current Status:
Display the port current status. The default is unlocked.
Locked Port - Resume:
When Port No is chosen, enable port' s Loop detection, and the port
detects loop happen, the port will be Locked. When choosing Resume,
port locked will be opened and turned into unlocked. If not choosing
Resume, Port maintains locked.
Action:
Option to enable the Loop-Detection function on the switch.
To Next Page
Loading...
Need help?
General
