RuggedCom RSG2488

RUGGEDCOM RSG2488
Installation Guide
Chapter 2
Installing the Device
Connecting to the Device 13
Section 2.6
Connecting to the Device
The RS232 serial console port on the front of the RSG2488 device provides access to the boot-time control and
configuration menu interface, as well as a console connection to the ROS™ Web interface.
1
Figure 16: Serial Console Port
1. RS232 Serial Console Port
Use the following settings when attempting to connect to the device through the serial console port:
• 57600 bps
• 8 bits
• No parity
• 1 stop bit