RUGGEDCOM RSG2488
Installation Guide
Chapter 1
Introduction
Feature Highlights 1
Introduction
The RSG2488 is a utility grade, fully managed, industrial Ethernet switch designed to operate reliably in harsh
environments. With rugged metal enclosure and an optional conformal coating, the RSG2488 provides a high
level of immunity to electromagnetic interference and heavy electrical surges, and can withstand temperatures
between -40 and 85 °C (-40 and 185 °F).
Highly modular, the RSG2488 switch supports up to 28 electrical and/or optical interfaces with data transfer rates
of 10/100/1000 Mbit/s. This makes it the ideal industry-standard switch for constructing electrical and/or optical
line, ring and star topologies.
Section 1.1
Feature Highlights
• Simple plug and play operation with automatic learning, negotiation and crossover detection
• MSTP 802.1Q-2005
• RSTP (802.1w) and Enhanced Rapid SpanningTree (eRSTP™) network fault recovery (<1ms)
• Quality of service (802.1p) for real-time traffic
• VLAN (802.1Q) with double tagging
• Port rate limiting and broadcast storm limiting
• Port configuration, status, statistics, mirroring, security
• SNTP time synchronization (client and server)
• Web-based, Telnet and CLI management interfaces
• SNMP (Simple Network Management Protocol) v1/v2/v3 (56-bit encryption)
• Rich set of diagnostics with logging and alarms
Section 1.2
Configuration Ports and Indicator LEDs
The RSG2488 features various ports and indicator LEDs on the front panel for configuring and troubleshooting
the device.
To Next Page
Loading...
Need help?
General
