RuggedCom RSG2488

RUGGEDCOM RSG2488
Installation Guide
Chapter 4
Technical Specifications
Power Supply Specifications 21
Technical Specifications
The following sections provide important technical specifications related to the device and available modules:
• Section 4.1, “Power Supply Specifications”
• Section 4.2, “Failsafe Relay Specifications”
• Section 4.3, “Port Specifications”
• Section 4.4, “Supported Networking Standards”
• Section 4.5, “Operating Environment”
• Section 4.6, “Mechanical Specifications”
• Section 4.7, “Pin Assignments”
Section 4.1
Power Supply Specifications
Table 2: Power Supply Specifications
Input Range
Power Supply Type
Min Max
Internal Fuse Rating
Maximum Power
Consumption
a
24 VDC (Single) 13 VDC 36 VDC 10 A 40 W
48 VDC (Single) 38 VDC 72 VDC 7 A 40 W
100 VDC 300 VDC 80 W
High Voltage AC/DC
88 VAC 264 VAC
3.15 A
80 W
a
Power consumption varies based on configuration. 10/100Base-TX ports consume roughly 1W less than fiber optic ports.
Section 4.2
Failsafe Relay Specifications
IMPORTANT!
The alarm switching voltage must be greater than the Safety Extra Low-Voltage (SELV) to meet safety
requirements.
Table 3: Form C Contact Relay Specifications
Parameter Value (Resistive Load)
Maximum Switching Voltage 240 VAC