Chapter 3
Modules
RUGGEDCOM RSG2488
Installation Guide
20 Removing an SFP Optical Port
3. Grab the metal bail-latch on the port and remove the port from the module.
Figure 30: Removing an SFP Optical Port
1. SFP Optical Port 2. Metal Bail-Latch
4. Immediately insert a dust cover in the empty port slot to prevent the ingress of dust and dirt.
5. Store the port in an ESD-safe bag or other suitable ESD-safe environment, free from moisture and stored at
the proper temperature (-40 to 85 °C or -40 to 85 °F).
To Next Page
Loading...
