Need help?Do you have a question about the RuggedCom RUGGEDBACKBONE RX5000 and is the answer not in the manual?
Overview of the web interface, navigation, and configuration modes.
Covers device management, system commands, user accounts, and software upgrades.
Configuration of IP interfaces, IPv4, and IPv6 addressing.
Management of alarm subsystems, LED behavior, clearing, and acknowledging alarms.
Configuration of local and remote syslog connections for event logging.
Setup for SNMP access, users, communities, and traps for network monitoring.
RADIUS server configuration for centralized authentication and authorization.
Information on hardware, module status, power controllers, and slot identification.
Configuration of DHCP server, subnets, pools, and IP address assignment.
Features for Ethernet port control, configuration, rate limiting, and diagnostics.
Authorizing network access using Static MAC or IEEE 802.1X authentication.
IEEE standard Spanning Tree functionality for loop prevention and topology management.
VLAN features for network segmentation, traffic isolation, and port configuration.
LLDP support for automated network discovery and topology information.
Overview of IP routing, Ethernet port types, and routing IP packets.
Hardware-based IP packet forwarding and routing rules configuration.
Configuration of IPsec, L2TP, and GRE tunnels for secure communication.
Details RIP, OSPF, and BGP protocols for automatic route discovery.
Stateful firewall system implementation for network security and access control.
Bandwidth management per interface using basic or advanced traffic shaping.
Configuration of backup links for automatic failover upon main link failure.
Procedures for preparing and performing operating system software upgrades.
Configuration procedures for RADIUS servers for authentication services.
Instructions for setting up a repository for software upgrades.
Procedures for adding and replacing line modules within the chassis.
The license terms and conditions for software copying, distribution, and modification.
To Next Page
General
