EasyManuals Logo
Home>RuggedCom>Switch>RUGGEDBACKBONE RX5000

RuggedCom RUGGEDBACKBONE RX5000 User Manual

RuggedCom RUGGEDBACKBONE RX5000
440 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #344 background imageLoading...
Page #344 background image
31. Dynamic Routing
ROX™ v2.2 User Guide 344 RuggedBackbone™ RX5000
The OSPF area network/prefix.
31.4.1.2. OSPF Redistribute
Redistribute from other Routing Protocols
This feature redistributes information from another routing protocol.
Redistribute Route From
Synopsis: string - one of the following keywords { bgp, rip, connected, static, kernel }
Redistributes the route type.
Metric Type
Synopsis: integer in the range [-32768 to 32767]
Default: 2
The OSPF exterior metric type for redistributed routes.
Metric
Synopsis: unsigned integer
The metric for redistributed routes.
31.4.1.3. OSPF Interfaces
Figure 31.12. Interface Parameters Table
The path to the Interface Parameters table is routing/dynamic/ospf/interface.
Figure 31.13. Interface Parameters Form
The path to the Interfaces form and Dead Interval form is routing/dynamic/ospf/interface/{interface}.
OSPF parameters on the selected interface.

Table of Contents

Other manuals for RuggedCom RUGGEDBACKBONE RX5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RuggedCom RUGGEDBACKBONE RX5000 and is the answer not in the manual?

RuggedCom RUGGEDBACKBONE RX5000 Specifications

General IconGeneral
BrandRuggedCom
ModelRUGGEDBACKBONE RX5000
CategorySwitch
LanguageEnglish

Related product manuals