31. Dynamic Routing
ROX™ v2.2 User Guide 345 RuggedBackbone™ RX5000
Interface Name
Synopsis: string
Interface name.
Authentication Type
Synopsis: string - one of the following keywords { null, message-digest }
The authentication type on this interface.
Link Cost
Synopsis: unsigned integer
The link cost. If not set, it cost is based on reference bandwidth.
Hello Interval
Synopsis: unsigned integer
Default: 10
The time (in seconds) between sending hello packets.
priority
Synopsis: unsigned byte integer
Default: 1
Priority of interface.
Passive Interface
Whether an interface is active or passive. Passive interfaces do not send LSAs to other routers and
are not part of an OSPF area.
Retransmit Interval
Synopsis: unsigned integer
Default: 5
Time (in seconds) between retransmitting lost link state advertisements.
Transmit Delay
Synopsis: unsigned integer
Default: 1
The link state transmit delay (in seconds).
Figure 31.14. Dead Interval Form
A dead interval is the time before considering a router dead.
Dead Interval
Synopsis: unsigned integer
Default: 40
The time before considering a router dead (in seconds).
Number of Hellos Per Second
Synopsis: unsigned byte integer
To Next Page
Loading...
Need help?
General
