15. DHCP Server
ROX™ v2.2 User Guide 147 RuggedBackbone™ RX5000
15.2.8.2.2. Client Configuration Options: Hosts
To set DHCP client configuration options at the host level, enter edit mode and navigate to /services/
dhcpserver/host{host id}/options.
Figure 15.13. Client Configuration form for Hosts
fixed-ip
Synopsis: IPv4 address in dotted-decimal notation
The IP address that the server assigns to the matching client
unknown-client
Synopsis: string - one of the following keywords { ignore, deny, allow }
The action to take for previously unregistered clients
shared-network
Synopsis: A string
Shared-network that this host belongs to
subnet
Synopsis: A string
Subnet that this host belongs to
host-groups
Synopsis: A string
Host groups that this host belongs to
15.2.8.2.3. Client Configuration Options: Host-groups
To set DHCP client configuration options at the host-group level, enter edit mode and navigate to /
services/dhcpserver/host-group{host-group id}/options.
Figure 15.14. Client Configuration form for Host-groups
To Next Page
Loading...
Need help?
General
