9. SNMP
ROX™ v2.2 User Guide 111 RuggedBackbone™ RX5000
9.8. SNMP Security to Group Maps
Entries in this table map the configuration of the security model and security name (user) into a group
name, which is used to define an access control policy. Up to 32 entries can be configured.
Figure 9.16. SNMP Security Model to Group Mapping table
The path to this table is admin/snmp/snmp-security-to-group.
Figure 9.17. Key Settings form
Figure 9.18. SNMP Security Model to Group Mapping form
The path to these forms is admin/snmp/snmp-security-to-group/{user}.
Security Model
Synopsis: string - one of the following keywords { v3, v2c, v1 }
The SNMP security model to use: SNMPv1, SNMPv2c, or USM/SNMPv3
User Name
Synopsis: string
The security name (a ROX user name) for the SNMP group.
Group
Default: all-rights
The SNMP group name.
9.9. SNMP Access
These parameters provide the ability to configure access rights for groups. To determine whether access
is allowed, one entry from this table needs to be selected and the proper view name from that entry
must be used for access control checking. View names are predefined:
To Next Page
Loading...
Need help?
General
