RuggedCom RUGGEDBACKBONE RX5000 - Checking NTP Status

3. Time Synchronization
ROX™ v2.2 User Guide 68 RuggedBackbone™ RX5000
Enable Broadcast Client
The broadcast address on which the NTP client listens for NTP messages.
3.2.10. Checking NTP Status
To view the NTP service status:
• In normal or edit mode, navigate to /services/time/ntp/ntp-status and click <ntp-status>.
• On the Trigger Action form, click Perform.
• Review the NTP service status in the NTP Service Status form.
Figure 3.12. NTP Service Status form
For more information on viewing NTP status information, refer to http://support.ntp.org/bin/view/Support/
TroubleshootingNTP