2. System Administration
ROX™ v2.2 User Guide 49 RuggedBackbone™ RX5000
Figure 2.33. ROXFlash forms
To perform a ROXFlash operation, enter the URL into the ROXflash form and then click the Perform
button. Next, monitor the progress by returning to the ROXflash Monitoring form.
2.7. Scheduling Jobs
Use job scheduling to execute CLI (command line interface) commands at a specified time and date or
in response to configuration changes. The path to the scheduler menu is admin/scheduler.
Figure 2.34. Scheduler menu
There are two types of scheduled jobs:
• periodic jobs launch at a defined interval. Set the interval in the Minute, Hour, Day of Month, and
Month parameters. Use the Day of Week parameter to launch the job on a specific day of the week,
such as every Friday. For information on how periodic scheduled jobs behave when you omit date
and time parameters, see Figure 2.36, “Scheduled Jobs Form” and the field descriptions.
• configchange jobs launch only when the configuration changes.
The job scheduler Command parameter accepts most ROX CLI commands. Do not use commands
that require a manual response or confirmation.
The /admin/scheduler/scheduled-jobs table lists the scheduled jobs and their settings:
To Next Page
Loading...
Need help?
General
