EasyManua.ls Logo

RuggedCom RUGGEDBACKBONE RX5000 - Client Configuration Form for DHCP Clients

RuggedCom RUGGEDBACKBONE RX5000
440 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15. DHCP Server
ROX™ v2.2 User Guide 148 RuggedBackbone™ RX5000
unknown-client
Synopsis: string - one of the following keywords { ignore, deny, allow }
Default: allow
The action to take for previously unregistered clients
shared-network
Synopsis: A string
Shared-network that this host group belongs to
subnet
Synopsis: A string
The subnet that this host group belongs to
15.2.8.3. Client Configuration Options at the DHCP Client Level
The following DHCP client, NIS, and NetBios options are set at the client level under all DHCP levels.
To set the client configuration options, enter edit mode and navigate to:
DHCP server options: /services/dhcpserver/options/client
subnet options: /services/dhcpserver/subnet{subnet id}/options/client
shared network options: /services/dhcpserver/shared-network{shared network id}/options/client
host-group options: /services/dhcpserver/host-groups{host-group id}/options/client
host options: /services/dhcpserver/host{host id}/options/client
Client Configuration:
Figure 15.15. Client Configuration form for DHCP Clients
hostname
Synopsis: A string
The unique name to refer to the host within a DHCP configuration
subnetmask
Synopsis: IPv4 address in dotted-decimal notation
Subnet mask
default-route
Synopsis: IPv4 address in dotted-decimal notation

Table of Contents

Other manuals for RuggedCom RUGGEDBACKBONE RX5000

Related product manuals