NOTES:
1. Maximum segment length is greatly dependent on factors such as fiber quality, and
number of patches and splices. Please consult RuggedCom sales associates when
determining maximum segment distances.
2. All cabling is duplex type unless otherwise specified.
3. All optical power numbers are listed as dBm averages.
4. These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20°C
to +85°C operation only.
5. The 25-10-0108 SFP module is obsolete, and has been replaced with the 70km
25-10-0109 SFP module.
33
© 2008 RuggedCom Inc. All rights reserved Rev105
To Next Page
Loading...
Need help?
General
