Ruida Technology RDC6445G - Introduction to the Keys

RDC6445G Control System manual V1.2
SHENZHEN RUIDA TECHNOLOGY
31
8.1.2 Introduction to the Keys

Reset the whole system.

To start or pause the work.

Let the Laser to splash.

Stop working or motor axis motion.

Automatic searching for focus.

User parameters, factory parameters, language settings, etc.

To track by the current file’s frame.

The management of the memory and U disc files.

Set the relative origin.

Set the laser power of the current running layer, or set the power of
“Laser” Key.

Special function switching.

Set the speed of the current running layer, or set the direction keys’
move speed.

To stop work, or to exit to some menu.