Web-based Configuration Guide Security
102
⚫ Storm control based on kilobytes per second: If the rate of data flows received over a device port exceeds
the configured kilobytes-per-second threshold, excess data flows are discarded until the rate falls within the
threshold.
7.3 ACL
7.3.1 Overview
An access control list (ACL) is commonly referred to as packet filter in some documents. An ACL defines a series
of permit or deny rules and applies these rules to device interfaces to control packets sent to and from the
interfaces, so as to enhance security of the network device.
You can add ACLs based on MAC addresses or IP addresses and bind ACLs to ports.
To Next Page
Loading...
Need help?
General