Web-based Configuration Guide Basic Management
41
Create a VLAN: Click Add. Enter the VLAN ID and description for the VLAN, and click OK. The VLAN added
will be displayed in VLAN List.
Note
● The range of a VLAN ID is from 1 to 4094.
● You can separate multiple VLANs to be added in batches with commas (,), and separate the start and
end VLAN IDs of a VLAN range with a hyphen (-).
● If no VLAN description is configured when the VLAN is added, the system automatically creates a VLAN
description in the specified format, for example, VLAN000XX. The VLAN descriptions of different VLANs
must be unique.
● If the device supports L3 functions, VLANs, routed ports, and L3 aggregate ports (L3APs) share limited
hardware resources. If resources are insufficient, a message indicating resource insufficiency for VLAN
will be displayed.
2. VLAN Description Modifying
In VLAN List, Click Edit in the last Action column to modify the description information of the specified VLAN.
3. Deleting a VLAN
Batch delete VLANs: In VLAN List, select the VLAN entries to be deleted and click Delete Selected to delete
VLANs in a batch.
To Next Page
Loading...
Need help?
General