F11GIM2 User Manual
6.3 Optimal Transmission Zone
6.4 Emergency Stop
Copyright ©2021 Ruko All Rights Reserved.14
By using this function the drone motor will stop working immediately thus fall to the
ground, which might cause damage. Only use this feature when in emergency so as
to reduce the risk of damage or injury.
The signal between the drone and the remote controller is most reliable when the antennas
are positioned in relation to the aircraft as shown below.
Click once and hold the for 3 seconds to enter into Emergency Stop mode. It only
activated when the drone's flight altitude within 5-42ft.
DO NOT use other wireless devices to avoid interference to the remote controller.
About 5 feet
To Next Page
Loading...
