RUKO F11PRO - Aircraft, Transmitter, and App Control; Aircraft Diagrams and Preparation

F11 PRO User Manual
Unfold the front arms
Unfold the rear arms and then unfold all the propellers
Copyright ©2023 Ruko All Rights Reserved. 12
All aircraft arms are folded before the aircraft is packaged.
Follow the steps below to unfold the aircraft arms.
2.4 Aircraft Diagram
2.3 Preparing the aircraft
① High-definition Camera
② Propellers
③ Motor (Pointing Unclear)
④ Led Indicator Light
⑤ Flight Battery
⑥ Power Button
⑦ Battery Level Leds
⑧ Camera SD Card Slot
⑨ Landing Gear
Unfold the front arms before unfolding the rear arms.
Before powering on the aircraft, ensure that the front and rear
arms are extended and the camera is placed on the horizontal
ground. Ensure that there is sufficient space under the camera to
prevent the camera angle from being stuck to the ground during
the self-check.