RUKO F11PRO - Return to Home

F11 PRO User Manual
Copyright ©2023 Ruko All Rights Reserved.
17
The front is
white and
the back is
blue
The front is
white and
the back is
blue
Searching for GPS
Blinking twice per
second indicates GPS
signal has not been
found. Blinking once
per second indicates
that GPS signal is
detected but the
conditions for takeoff
are not met.
White and blue are
blinking blinking twice
every second blinking
once every second
Color of light
Blinking status of
the indicator
Conditions
The front is
white and
the back is
blue
White and blue are
blinking fast
Gyroscope/level
calibration is required.
White and blue always
turn on
GPS signal is detected
and take-off conditions
are met.
3.3 Return to Home
The Return to Home (RTH）function brings the aircraft back to the last
recorded Home Point. There are three types of RTH: Smart RTH, Low
Battery RTH, and Signal Disconnection RTH. If you activate the RTH
function under the condition that the aircraft successfully recorded
the Home Point and the GPS signal is good, the aircraft will automati-
cally return to the Home Point and land.