Runxin F105AD - Page 18

14
C.Process Display (Meter Type & Down-Flow Brine Draw as example)
G1 G2 G3
G4 G5 G6
G7 G8 G9
Illustration:
●In Service status, the figure shows G1 and G2; In Brine Refill status, it shows Figure G3;
●In Brine Dissolve status, the figure shows G4; In Backwash status, it shows Figure G5;
●In Brine & Slow Rinse status, it shows figure G6; In Fast Rinse status, it shows Figure G7;
●When the electrical motor is running, it shows Figure G8;
●The display will show Figure G9 when the system is in error.
●In vacation mode, it shows “VAC. MODE”;
D. Enter / exit vacation mode
In service mode of unlocked status, press and hold for 6 seconds to enter vacation
mode with buzzer sounding and electrical motor running. Firstly, it enters Brine Refill status.
Secondly, it turns to Pause 1 status for 240 minutes Brine Dissolve status after Brine Refill.
Thirdly, it is in Brine & Slow Rinse status after Brine Dissolve (Time of Brine drawing is 25%
**Error**
12:50:32
Motor Running…
17:04:32
Water System
Fast Rinsing…
Remaining: 3min.
16:58:32
Water System
Brine & Slow Rinse…
Up-flow
Remaining: 30min.
16:54:32
Water System
Backwashing…
Remaining: 2min.
12:53:32
Water System
Dissolving…
Remaining: 240min.
Cur. F. R.: 2.20 m
3
/h
12:50:32
Water System
Brine Refilling…
Remaining: 03:00 m:s
12:30:45
Water System
In-Service
Remaining:1.50 m
3
Regen. Time: 02:00
12:30:45
Water System
In-Service
Remaining:1.50 m
3
Cur. F. R.: 2.20m
3
/h