15
of the normal setting).
After Brine & Slow Rinse, it turns to Pause 2 status. Press and hold for 6 seconds
to exit vacation mode with buzzer sounding and electrical motor running.
E. Relieve the leakage protection status
E-1. Method for relieving leakage protection in normal mode
G10
When the working interface of the valve shows as G10, it indicates that the pipeline is
leaking under normal operation and the valve is in the closed protection position. At this
time, after unlocking, press and hold the button for 5 seconds to exit the leakage
protection and enter the service status.
E-2. Method for relieving leakage protection in vacation mode
G11
When the working interface of the valve shows as G11, it indicates that the pipeline is
leaking under vacation mode, and the valve is in the closed protection position. At this time,
after unlocking, press and hold the button for 5 seconds to exit the leakage protection
and enter the fast rinse status. After the fast rinse is finished, it will turn to service status.
F. Parameter Setting for Users
02:01:30
Water System is closing.
After unlock, press key for 5
seconds to service status.
To Next Page
