Runxin F105AD - Page 32

28
display screen will show Figure A5. Can press or to choose brine & slow rinse
type. Press , it will save and return to H1; Press , it will return to H1 without saving
the value.
⑥ When the display screen shows Figure H1, select “Set Backwash Time”, and press ,
the display screen will show Figure A6. Can press or to choose backwash
time. Press , it will save and return to H1; Press , it will return to H1 without saving
the value.
⑦ When the display screen shows Figure H1, select “Set B.S.R.T.”, and press , the
display screen will show Figure A7. Can press or to choose brine & slow rinse
time. Press , it will save and return to H1; Press , it will return to H1 without saving
the value.
⑧ When the display screen shows Figure H1, select “Set B.R.Time”, and press , the
display screen will show Figure A8. Can press or to choose brine refill time.
Press , it will save and return to H1; Press , it will return to H1 without saving the
value.
⑨ When the display screen shows Figure H1, select “Set F.R.Time”, and press , the
display screen will show Figure A9. Can press or to choose fast rinse time.
Press , it will save and return to H1; Press , it will return to H1 without saving the
value.
⑩ When the display screen shows Figure H1, select “Interval B.W. Times”, and press ,
the display screen will show Figure A10. Can press or to choose interval
backwash times. Press , it will save and return to H1; Press , it will return to H1
without saving the value.
⑪ When the display screen shows Figure H1, select “Interval Regen. D.”, and press ,
the display screen will show Figure A11. Can press or to choose interval
regeneration days. Press , it will save and return to H1; Press , it will return to H1
without saving the value.
⑫ When the display screen shows Figure H1, select “Set Alarm Times”, and press , the
display screen will show Figure A12. Can press or to choose regeneration
alarm times. Press , it will save and return to H1; Press , it will return to H1 without
saving the value.
⑬ When the display screen shows Figure H1, select “Salt Adding Volume”, and press ,
the display screen will show Figure A13. Can press or to choose salt adding