Ryf Axio Lab.A1 - Default Chapter; Table of Contents

Axio Lab.A1 Contents / List of Illustrations Carl Zeiss
04/2013 430037-7144-001 3
CONTENTS
Page
1 INTRODUCTION ................................................................................................... 7
1.1 Notes on instrument safety .......................................................................................... 7
1.2 Notes on ergonomics of the microscope .................................................................... 12
1.3 Notes on warranty ...................................................................................................... 13
2 DESCRIPTION OF THE INSTRUMENT ................................................................. 14
2.1 Intended use ................................................................................................................ 14
2.2 System overview ......................................................................................................... 16
2.3 Technical data .............................................................................................................. 21
2.3.1 Viewing height and tube angle ....................................................................................... 23
2.3.2 Assignment of dust covers, intermediate plate and base plate ......................................... 24
2.4 Control and functional elements on microscope ....................................................... 26
2.4.1 Stand models ................................................................................................................. 26
2.4.2 Stand for transmitted light .............................................................................................. 26
2.4.3 Stand for transmitted light polarization ........................................................................... 28
2.4.4 Stand for transmitted light and reflected light fluorescence ............................................. 30
2.4.5 Stand for reflected light .................................................................................................. 32
2.4.6 Stand for transmitted light conoscopy ............................................................................. 34
2.4.7 Ergo stands with TÜV certificate "Ergonomically tested" ................................................. 36
2.5 Control and functional elements on optional components ...................................... 37
2.5.1 Tubes/photo tubes ......................................................................................................... 37
2.5.2 Microscope stages .......................................................................................................... 41
2.5.3 Condensers .................................................................................................................... 43
2.5.4 Reflector turret 4x .......................................................................................................... 45
3 START-UP ........................................................................................................... 46
3.1 Installing standard components ................................................................................. 46
3.1.1 Unpacking and setting up microscope stand ................................................................... 46
3.1.2 Mounting base plate for use of larger tubes .................................................................... 47
3.1.3 Attaching the binocular tube/photo tube ........................................................................ 48
3.1.4 Installing eyepieces or auxiliary microscope or diopter ...................................................... 49
3.1.5 Screwing in objectives .................................................................................................... 50
3.1.6 Fitting and removing push&click modules in the reflector turret ....................................... 51
3.1.7 Mounting a mechanical stage ......................................................................................... 52
3.1.8 Mounting rotary stage Pol .............................................................................................. 54
3.1.9 Attaching condenser ...................................................................................................... 57
3.1.10 Installing or replacing 35 W halogen bulb or 3 W white light LED lamp ............................ 58
3.1.11 Installing or changing the 12 V 50 W halogen lamp ................................
........................ 60
3.1.12 Installing or replacing LED modules ................................................................................. 61