Rynan R20 - Page 39

USER MANUAL V4.0 | Updated Jan 06, 2021 39
MESSAGE_4, MESSAGE_4, MESSAGE_4… MESSAGE_4…
The last message will be printed and the printer will save this messages for next print until new
messages is coming.
6.5.2. Data type (POD)
DRAW data/JSON
6.5.3. Rule (POD)
6.5.3.a. Split Character
The separator uses to divide the sender’s data to multiple data fields.
Support: Tab (‘\t’), Space (‘ ’), Dot (‘.’), Comma (‘,’), Semi Colon (‘;’), Star (‘*’), Colon (‘:’),
Hash (‘#’), AT (‘@’), Mod (‘%’), And (‘&’), Question (‘?’).
6.5.3.b. Encoding
The encode format of sender’s data.
Support: ASCII, Big Endian Unicode, Unicode, UTF32, UTF7, UTF8, IBM850, IBM852, IBM860,
IBM863, Windows1252, ISO8859_1.
6.5.4. Connection (POD)
Allow sending or receiving data / remote printer / get current status from 3
rd
party devices
(Desktop / Laptop / PLC / Mobile devices / …) via TCP/IP protocol, we call Sender.
6.5.4.a. Controller IP
This is IP of controller. It is assigned by a customer's network or from a device connected to it
6.5.4.b. Controller Port
This is Port of controller.
6.5.5. Monitor (POD)
On POD software, this function will allow user get realtime printer information as: Speed, Printer
status, Printed pages, Printhead status,…
6.5.5.a. None
Do not response the printer status.
6.5.5.b. Time interval
Setup time to response the printer status to POD software.
Time to response (second): Set time for printer response to POD software.
6.5.5.c. Each print
Response the printer status after each printed.