SAB Goblin 700 - Chapter 18, Spare Parts

Battery Tray
[H0002-S]
Frame Spacer
[H0003-S]
- 3 x Frame Spacers. - 10 x Finishing Washers M3.
Finishing Washer M3
[H0007-S]
Main Structure
[H0009-S]
Servo Support
[H0010-S]
- 1 x CF Swashplate
Anti-Rotation Guide.
- 1 x Finishing Washer M3.
- 1 x Socket Head Cap Screw
M3x8mm.
Swashplate Anti-Rotation Guide
[H0017-S]
Chapter 18, Spare Parts
Column
[H0018-S]
- 4 x Columns.
- 1 x Bearing Support.
- 1 x Bearing
12x 24x6mm.
- 3 x Flat Head Cap Screws
M2.5x5mm.
Bearing Support
[H0024-S]
- 1 x Safety Lock Tail Boom.
- 1 x Finishing Washer M3.
- 1 x Socket Head Cap Screw
M3x8mm.
Safety Lock Tail Boom
[H0038-S]
- 2 x Tail Servo Locks.
- 2 x Servo Spacers.
- 4 x Socket Head Cap Screws
M2.5x12mm.
Tail Servo Lock
[H0040-S]
- 2 x Locking Element Tails.
- 4 x Metric Hex Nylon Nuts M3.
- 2 x Double Sided Tapes.
Locking Element Tail
[H0041-S]
Spacer Flybarless
[H0043-S]
- 3 x Spacer Flybarless.
- 1 x Supporto Flybarless.
- 1 x Flat Head Cap Screw M3x8mm.
- 5 x Socket Head Cap Screws
M3x6mm.
- 1 x Linkage Tail Support.
- 2 x Socket Head Cap
Screws M2.5x6mm.
Linkage Tail Support
[H0045-S]
Yellow Vertical Fin
[H0046-S]
- 1 x Yellow Vertical Fin.
- 2 x Socket Head Cap Screws
M3x12mm.
- 2 x Finishing Washers M3.
- 2 x Antenna Guide.
- 2 x Button Head Cap
Screws M3x4mm.
Antenna Guide
[H0050-S]
Aluminum Bell Crank Base
(H0058BL-S)
- 1 x Main Structure.
- 1 x Aluminum Bell Crank Base.
Tail Case Spacer
[H0061BL-S]
- 2 x Tail Case Spacers.
- 4 x Socket Head Cap
Screws M3x8mm.
Uniball M3x4 5H18
[H0063-S]
- 2 x Uniball M3x4 5H18.
Uniball M2 5H6
[H0064-S]
- 5 x Uniballs M2 5H6.
- 5 x Uniball Spacers.
- 5 x Socket Head Cap
Screws M2x8mm.
- 5 x Socket Head Cap
Screws M2x6mm.
Uniball M3x4 5H3
[H0065-S]
- 5 x Uniballs M3x4 5H3.5.
- 1 x CF Battery Tray.
- 6 x Flat Head Cap Screws
M2.5x5mm.
- 1 x Servo Support.
Page 35