31
English
BEVERAGE F
H2O COFFEE 012
BEVERAGE F
SUGAR 002
BEVERAGE B
SEQUENCE 0 0 C C
PRICE VALUES
PRICE 01
PRICE VALUES
PRICE 01: 200
PRICE BEVERAGE
1- 200:ABCDEFGHIJ
CUP SELLING
YES
CUP SELLING
— ->Y< N ++
AUTOMATIC CUP
YES
It shows the water quantity (e.g.: 012) that is used to dispense the coffee for
this beverage. Press ENTER to modify the value. When the blinking cursor appe-
ars, press the “+” and “-” buttons to modify the value. Press ENTER to confirm.
It allows you to modify the standard quantity of sugar dispensed with the
beverage. Press ENTER to modify the value. When the blinking cursor ap-
pears, press the “+” and “-” buttons to modify the value. Press ENTER to
confirm. The user can still increase or decrease the programmed sugar
quantity by pressing the “+” or “-” pre-selection buttons.
DOUBLE CYCLE
As explained previously, it is possible to program a beverage composed of more than one cycle of the same product.
For example, to program two shots of espresso for “BEVERAGE B”, when
the message “
SEQUENCESEQUENCE
SEQUENCESEQUENCE
SEQUENCE” appears, type “C” for the first and second
character to identify bin no. 8 (coffee beans). The system will request the
water quantity for coffee and the sugar quantity. These same quantities will
automatically carry over to the second or third cycles. If the decaffeinated
selection has been activated, after having programmed the parameters for
the coffee beans, the parameters regarding the decaffeinated option “5”
should be programmed as well.
PRICE PROGRAMMING
Ten price levels are available and can all be modified (for example PRICE 01).
By pressing ENTER, the value currently in use (e.g.: 200) is displayed on
the second line, next to the message “
PRICE 01PRICE 01
PRICE 01PRICE 01
PRICE 01”. Use the “+” and “-”
buttons to scroll through all available prices. Press ENTER to modify the va-
lue. The blinking cursor appears. Use the “+” and “-” buttons to modify the
value. Press ENTER to confirm. The increments and ranges are pre-defined.
If you decide not to modify the value, press CANCEL.
Press ENTER to display the first price: “
PRICE 1PRICE 1
PRICE 1PRICE 1
PRICE 1:”. The number (200) in-
dicates the price value. The letters refer to the beverages corresponding to
this price. To associate a beverage to a price, simply move to the desired
price using the “+” and “-” buttons and then press the button correspon-
ding to the beverage that you want to associate to the price. The appearan-
ce of the letter on the display confirms the association of the beverage to
that price. Press CANCEL ref. 5 (Fig. 24) to exit this mode.
It allows you the option of two different functions . If “
YESYES
YESYES
YES” is chosen, but-
ton ref. 5 (Fig. 23) is associated with cup only dispensing (without a beve-
rage). If “
NONO
NONO
NO” is chosen, the button becomes a pre-selection function. If you
press the button before selecting a beverage, the machine will not dispense
a cup. Therefore, the user must use his or her own cup.
Press ENTER to activate the selection. Use the “+” and “-” buttons to move
the cursor to the selected function, then press ENTER to confirm.
If “
YESYES
YESYES
YES” has been programmed in the previous message, you can activate
or disable the automatic cup drop function for all beverages. Selecting
“
NONO
NONO
NO”, all beverages will be supplied without a cup; however it will be pos-
sible to pre-select a cup from the machine by pressing the button ref. 4 (Fig.
23). Press ENTER to acti
To Next Page
Loading...
