32
English
PRICE CUP
-100
ON/OFF TIME
— ->Y< N ++
ON/OFF TIME
0N 1: mtwtfss. 00:00
FREE RESET BUTTON
YES
FREE
* ALWAYS *
FREE
* NEVER *
FREE
* TIME RANGE E *
FREE
0N 1: mtwtfss. 00:00
vate the choice. Use the “+” and “-” buttons to choose the function. Press
ENTER to confirm.
This message has different functions according to the setting of the option
“cup sales”. If “
YESYES
YESYES
YES” has been programmed, the indicated price (which
can only have a positive value) represents the sales price of the cup only
(without a beverage). If “
NONO
NONO
NO” has been programmed, the indicated value
(which can have a positive or negative value) represents the price increase
or discount on the price of the beverage.
Positive value (e.g.: 100): this value is automatically added to the price of
the beverage if the pre-selection button “
WITHOUT CUPWITHOUT CUP
WITHOUT CUPWITHOUT CUP
WITHOUT CUP” is not pressed.
If the pre-selection button is pressed, the beverage is dispensed at the nor-
mal
price.
Negative value (e.g.: -100): this value is automatically deducted from the
price of the beverage if the pre-selection button “
WITHOUT CUPWITHOUT CUP
WITHOUT CUPWITHOUT CUP
WITHOUT CUP” is
pressed.
Press ENTER to activate the blinking cursor. Program the desired value
using the “+” and “-” buttons. Press ENTER to confirm the value.
It enables the operation of both the free button ref. 10 (Fig. 22) and the
quick reset function for the counters and stop values (see pag. 25) . By
pressing ENTER, the blinking cursor appears. Use the “+” and “-” buttons
to select the desired option, then confirm by pressing ENTER again.
TIME PROGRAMMING
Press ENTER to move to the second line where all options are listed. The first
option is “
FREEFREE
FREEFREE
FREE”. Free dispensing of products can be “
ALWAYSALWAYS
ALWAYSALWAYS
ALWAYS”, “
NE-NE-
NE-NE-
NE-
VERVER
VERVER
VER” or “
WITHIN TIME RANGESWITHIN TIME RANGES
WITHIN TIME RANGESWITHIN TIME RANGES
WITHIN TIME RANGES”. Press ENTER to modify the mes-
sage. Use the “+” and “-” buttons to select the desired option. Press ENTER
to confirm. If option “
ALWAYSALWAYS
ALWAYSALWAYS
ALWAYS” or “
NEVERNEVER
NEVERNEVER
NEVER” is selected, the program-
ming mode is complete.
If option “
WITHIN TIME RANGESWITHIN TIME RANGES
WITHIN TIME RANGESWITHIN TIME RANGES
WITHIN TIME RANGES” is selected, free beverages can be
dispensed within two different time ranges. For each range, set the starting
(
ON1-OFF1ON1-OFF1
ON1-OFF1ON1-OFF1
ON1-OFF1) and stopping time (
ON2-OFF2ON2-OFF2
ON2-OFF2ON2-OFF2
ON2-OFF2). By pressing ENTER, the
blinking cursor appears under the character identifying the day of the
week. Use the “+” and “-” buttons to change the character from upper case
to lower case. “Upper case” = day selected. “Lower case” = day not se-
lected. After each selection, press ENTER to move the cursor to the next
character. Use the “+” and “-” buttons to program the starting time. After
selecting the last value and confirming it through ENTER, you will automati-
cally be requested to program the stopping time (
OFF1OFF1
OFF1OFF1
OFF1) and the starting
and stopping times of the second time range (
ON2-OFF2ON2-OFF2
ON2-OFF2ON2-OFF2
ON2-OFF2). In case you do
not want to modify anything, press the CANCEL button. After setting
OFF2OFF2
OFF2OFF2
OFF2,
you will automatically exit the menu.
It allows you to program the automatic turning on/off times of the machine
over the course of a week. Press ENTER to activate the arrow cursor and
use the “+” and “-” buttons to make a selection.
If “
YESYES
YESYES
YES” was selected, two turning on/off time ranges will be requested
(
ON1-OFF1, ON2-OFF2ON1-OFF1, ON2-OFF2
ON1-OFF1, ON2-OFF2ON1-OFF1, ON2-OFF2
ON1-OFF1, ON2-OFF2). To program days and hours, follow the
same procedure used above for the “
FREEFREE
FREEFREE
FREE” parameter.
To Next Page
Loading...
