English
10
100
The machine will now start dispensing the descaling
solution at intervals (the bar shows the cycle progress).
When the solution in the tank is finished, the machine
requests to empty and rinse the tank with fresh drinking
water.
Rinse the water tank thoroughly and fill it with fresh
drinking water.
Insert the tank into the machine. Press the "Coffee"
button.
Empty the containers used to collect the liquid dispensed
by the machine.
Drain any liquids from the drip tray and place it back into
the machine. Press the "Coffee" button.
Check that the Cappuccinatore is placed in the machine.
Press the "Coffee" button.
Place a container under the hot water wand and a large
container under the Cappuccinatore. Press the "Coffee"
button.
The machine performs the rinse cycle.
A default amount of water
is needed for the rinse
phase. This allows an ideal
rinse cycle to be
performed in order to
ensure the best conditions
to brew products. A
message to fill the water
tank will be displayed
throughout the rinse cycle.
This is normal and part of
the procedure.
To Next Page
Loading...
