English
7
37
Before brewing any
product and/or when
bringing the dispensing
spout back to its normal
position, ensure that it is
correctly positioned. This
can be evidenced by the
CLICK indicating correct
positioning.
Otherwise, some product might leak out of the dispensing
spout.
7.11 Turning on/off the Machine
The machine can be turned on/off by pressing the button
located to the rear of the machine.
7.12 Setting the Language (Upon
First Use)
At first start-up, the desired display language of the
messages must be selected and stored. This allows the
beverage parameters to be adjusted to the specific taste of
the country where the machine is in use.
Select the language by pressing the "Clean" button or the
"Cappuccino" button.
Press the "Coffee" button to store the language.
The machine starts the system warm-up.
Upon first use, once
warm-up has been
completed, the machine
primes the circuit and
performs a rinse cycle of
the internal circuits. During
this process, a small
amount of water is
dispensed. Wait for this
cycle to be completed.
To Next Page
Loading...
