English
7
35
Enable the safety device again
as soon as the adjustment has
been completed.
Turn the lever by only one notch at a time during the
grinding phase. Brew 2-3 cups of coffee to verify changes
in grind. The reference marks indicate the grind setting.
There are different grind settings to choose from with the
following references:
1 - Fine grind
2 - Coarse grind
7.9 Adjusting the "Aroma" -
Amount of Ground Coffee
The machine allows you to program the amount of coffee
to be ground for preparing each cup of coffee.
The Aroma adjusting lever
must only be turned when
the coffee grinder is
stopped. The adjustment
must be performed before
brewing coffee.
Do not change the coffee
dose with pre-grinding set
to "ON" on machines
where this option is
available.
For any adjustments, use the lever located on the inner
side of the service compartment.
Open the service compartment door with the appropriate
key.
The reference marks indicate the amount of ground coffee
which has been set.
You can set different amounts with the following
references:
3 - Minimum coffee amount (about 7 grams)
4 - Maximum coffee amount (about 11 grams)
To Next Page
Loading...
