English
8
42
The above mentioned
procedure can be used to
access the programming
menu also when the
machine is still cold and has
not reached operating
temperature; To execute
certain programmes (e.g.
DESCALING), the
machine will manage the
procedure automatically
and warm up according to
the manufacturer's settings.
After 3 minutes of
inactivity, the machine will
exit programming mode
and return to standard
operating mode.
The menus should be
PASSWORD-protected.
The PASSWORD will not
be requested if set on the
default value (0000). It
should be changed upon
first use to prevent
unauthorised access. After
this change, it should be
entered again at each
access, every time the
display shows:
Refer to section "Password Setting" to set the
PASSWORD; this section describes how to set it.
To Next Page
Loading...
