Saeco SUP040RB - Measuring Water Hardness

English
7
31
The anti-scale filter should
be replaced whenever
indicated by the machine.
Before descaling, remove
the anti-scale filter from
the water tank.
Measuring water hardness
is very important in order
to correctly manage the
"INTENZA+" water filter
and the frequency with
which the machine must
be descaled.
Remove the "INTENZA+" water filter from its packaging.
The filter should be set according to the measurements
performed to set water hardness.
Use the water hardness test strip provided with the
machine. Set the "Intenza Aroma System" as specified on
the filter package (see section "Measuring and Adjusting
Water Hardness").
A Soft water
B Hard water (standard)
C Very hard water
Immerse the "INTENZA+" water filter vertically in cold
water (with the opening positioned upwards) and gently
press its sides to let the air bubbles out.
Switch to programming mode as described in section
"Access to the Programming Menu".
Press the "Clean" button, to select the "MACHINE
MENU" option.