Safco CS-I 150A - Page 54

CS-I User and Maintenance, R.2.8 ENG
Safco Systems Ltd-Via Isonzo 17/b-20090 Cesano Boscone-Milan-Italy
tel. +39 024504433 Fax +39 024504321 E-mail:info@safcosys.it Web site: www.safcosys.it
54 of 109
Ser.Direct:
Range value: NO- PC-PRN-
It selects the use of RS232.
RS-485 bps:
Range value: 4800-9600-19200
It selects the transmission rate of RS-485.
Parity:
Range value: none-even-odd
It selects the parity transmission of the RS485.
Stop Bit:
Range value: 1-2
It selects the stop bits of the RS485.
RS-485 Unit Address:
Range value: 0-31
It selects the network node on the CS-I / P (RS485).
Active ANCC Card
Range value: None (only for visualization)
Indicates the presence and type of card in the Compact Com expansion bus network
communication parallel CS-I / P.
ANCC Card Unit Node:
Range value: 1-125
Selects the network node on Compact Card Com located on CS-I / P.
Network bps:
Range value: Kbps 10-20-50-100-125-250-500-800- 1Mbps Autodef
Select the communication speed of the CAN Bus or device net. Bus
Other parameters are available when the specific communication card is installed