CS-I User and Maintenance, R.2.8 ENG
Safco Systems Ltd-Via Isonzo 17/b-20090 Cesano Boscone-Milan-Italy
tel. +39 024504433 Fax +39 024504321 E-mail:info@safcosys.it Web site: www.safcosys.it
62 of 109
4.2.16 Copy Program
Display Windows
CS-I Copy Program
Program To Copy N° 0
Copy Range From Prg. N° 0
To Prg. N° 0
Copy (NO/YES) NO
EXIT (Pess +)
Program To Copy N°:
Range value: from 0 to 63
Sets the program number to be duplicated in one or more programs.
Copy Range
From Prg.N°:
Range value : from 0 to 63
Set the program number from which to duplicate the preset program
To Prg.N°:
Range value: da 0 a 63
Set the number of the program to get to duplicate the preset program.
Set Date for these two parameters are the same value is obtained a copy of a single
program.
Copy (NO/YES):
Range value : from NO to YES
Defaults to NO to bringing you start copying the program, once completed an OK appears
next to the YES.
To Next Page
Loading...