Safco CS-I 150A - Display Windows and Measures

CS-I User and Maintenance, R.2.8 ENG
Safco Systems Ltd-Via Isonzo 17/b-20090 Cesano Boscone-Milan-Italy
tel. +39 024504433 Fax +39 024504321 E-mail:info@safcosys.it Web site: www.safcosys.it
79 of 109
8.1. Main measures window
The main window displays the measures of the last welding performed. In Seam mode
instead , one of three running welding, or other way at the end of the cycle, the last
executed.
For the spot mode, depending on the mode of work, called by the running program, the
window displays main measures readout as by the following combinations:
Main measures window: D ‰, V ‰ and constant current IK
Display window
TIME 1 0ms
IRMS 1 0.00KA
TIME 2 0ms
IRMS 2 0.00KA
Main measures window in constant power, PK
Display window
TIME 1 0ms
POWER 1 0.00KW
TIME 2 0ms
POWER 2 0.00KW
Main measures window in constant energy, EK
Display window
TIME 1 0ms
ENERGY 1 0J
TIME 2 0ms
ENERGY 2 0J
Main measures window in adaptive AD or if VE = YES.
Display window
TIME 1 0ms
IRMS 1 0.00KA
TIPS 0.00 V
RES. 0.00uΩ
In seam mode, there is only one combination:
Main measures window in D‰, V‰ and constant current IK
Display window
TIME 0ms
PAUSE 0ms
IRMS 0.00KA