15
Intercom
If your VHF system has more than one control unit, it is possible to
carry out an intercom between two control units.
When the intercom feature is used the VHF will perform as follows:
Initiating an intercom from the VHF set to another control unit:
To call another control unit:
1. Press
This display indicates that the unit expects an input of the
location number to be called.
2. Press a numeric key to choose location to be called
Ex:
3. If location 2 is NOT available,
the display shows
and no dialling is carried out.
If location 2 is available the
display shows
and a ringing tone is heard in
the speaker/earpiece.
IC2
NOT AVAIL
IC
SELECT NO
IC2
CALLING
To Next Page
Loading...
