Sainlogic FT0073 User Manual (English)

Questions and Answers:

J
Jon RiveraAug 10, 2025
What to do if Sainlogic Weather Station shows dashes on the display console?
- S
  Seth HamiltonAug 10, 2025
  If your Sainlogic Weather Station displays dashes, it indicates that the remote sensors are not transmitting correctly. This can happen if there are obstructions like solid metal (which acts as an RF shield) or earth barriers (like hills) between the sensor and the console. Ensure the remote sensors are not transmitting through these obstructions. Additionally, try moving the display console away from devices that generate electrical noise, such as computers, TVs, and other wireless transmitters. You might also need to move the remote sensor to a higher or closer location.
T
timothy60Aug 15, 2025
Why is my Sainlogic FT0073 Weather Station wireless remote not reporting to the console?
- J
  Jennifer BurnsAug 15, 2025
  If the wireless remote of your Sainlogic Weather Station isn't reporting to the console, try these steps: First, move the sensor closer to the display console. Next, check that the remote sensor's LCD is working and that its transmitter light flashes every 60 seconds. If not, install a fresh set of batteries in the remote thermo.
C
cassandrahaneyAug 20, 2025
What to do if Sainlogic FT0073 Weather Station indoor and outdoor temperature do not agree?
- P
  paynejessicaAug 20, 2025
  If the indoor and outdoor temperature readings on your Sainlogic Weather Station don't match, keep in mind that the sensors should agree within 2 °C, as the sensor accuracy is ± 1 °C. Allow up to one hour for the sensors to stabilize due to signal filtering. If the discrepancy persists, use the calibration feature to match the indoor and outdoor temperature to a known source.

Sainlogic FT0073 Specifications

General

Brand	Sainlogic
Model Number	FT0073
Category	Weather Station
Type	Wireless
Display	LCD
Indoor Temperature Range	0°C to 50°C
Rainfall Measurement/Display	Yes
Barometric Pressure Measurement	Yes
Weather Forecast	Yes
Alarm Function	Yes
Memory Function	Yes
Backlight	Yes
Power Supply	AC adapter or batteries
Wind Speed	0 to 50 m/s
Wireless Range	100 meters
Power Source (Base Station)	AC adapter
Power Source (Remote Sensor)	2 x AA batteries
Power Source (Indoor unit)	batteries