5.4 Shut Down the Inverter
The inverter can be shut down by the following steps:
1. Turn OFF the DC switch on the right side of the inverter;
2. Long pressing the battery switch on the right side of the inverter (approx. 5
second), the blue light shown on the button area will be gone out after the
button is being released, the battery is shut down;
3. Disconnect the external AC switch, the inverter is shut down.
5.5 Remote Monitoring
The communication module is connected to the Internet, and the inverter data is
uploaded to the server. The user can remotely monitor the inverter operation info
through the web version of the Web Portal or mobile device. Installation of
communication module
The procedure of connecting module via eSolar SET APP.
1) Download eSolar SET APP and log in
For iOS system, you could search “eSolar SET” in App Store to download and
install this APP.
For Android system, you could search “eSolar SET” in Google play to download
and install this APP.
2) Module connection
After installation of the module, power on the inverter. If the module signal light
is green and flickering, it indicates that the module is working normally and
sending data to server. If the station is built, the inverter information can be
viewed on APP or website.
3) Bluetooth connection
1 Turn on mobile phone's Bluetooth connection.
To Next Page
Loading...
Need help?
General
