SAJ Suntrio Plus Series - Page 42

Suntrio Plus Series
-
41
-
2. Press▼and then press
ENT to enter into “Display
Settings”, and then press
▲and▼to change the sleep
time of LCD, click OK or return
back.
Factory Reset
1. In the main LCD interface,
press “ENT” button, then
press ▶ to enter into “Setting”.
Factory Reset
2. Press▼and then press
ENT to enter password, and
then enter into Factory
Settings.
Attention: Please contact SAJ
if you need password.
3. Click OK to save the
changes.
Power
1230W
E-Today
11.33 kWh
T-Today
1.
7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting Run-Info
About
E-Total
14.35 kWh
LCD SettingNormal
LCD Backlight Time-
out :
30 Seconds
CancelOk
Power
1230W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting Run-Info
About
E-Total
14.35 kWh
E-today 11.33 kWh
Normal
Cancel
Verify
Please enter
0
0 0 0 0 0
Ok
Power
1230W
E-Today
11
.33 kWh
T-Today
1.
7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting Run-Info
About
E-Total
14.35 kWh
Factory Reset
Normal
Attention ：If you click the button “Ok”,
all generated energy data and error records saved in
inverter will be deleted permanently! The password
and grid compliance etc. will be reset to factory
setting.
Cancel
Ok
Power
1230W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4.6 h
15-07-09 15：47
Graph
Setting Run-Info
About
0
3.7
7.4
11.1
14.8
18.5
22.2
25.9
29.6
kW
33.3
3 5 7 9 11 13 15 17 19 21h
E-Total
14.35 kWh
E-Today 11.33 kWh
Normal
Communicate Set
Language & Time
Grid Compliance
Clear Error
Clear Energy
LCD Setting
Change Password
PV Mode Setting
Exit
Factory Reset