Section 4
19 Intensive clean in progress, waiting for user
intervention.
88 Ink cartridge being changed; instrument waiting
for confirmation via ERROR, CLEAN, or LOAD
key.
Display
indications-Warnings
81 - 83 Problem during ejection from Magazine X
due
to mechanical sluggishness. (X= second
digit of the error message). Clean the
magazine discharge using a small brush
87 After the last cartridge change, the CLEAN key
was pressed to indicate that a transport cartridge
has been inserted. The printer has received a
print job but is unable to print because the
cartridge contains cleaning fluid instead of ink.
Cancel the print job, switch the printer off and
back on, and change the cartridge. Press the
LOADED or ERROR key and wait until “00” is no
longer displayed follow the same procedure after
accidentally pressing the CLEAN key.
Display indications-Error
Messages
All displayed numbers 20 … 83 and, 89 and 90. A list
of all error messages and their corresponding sources and
solutions are summarized in Section 7.
Audible Signals
The printer has an alarm that issues audible signals
draw attention to important states and functions.
Key pressed:
1 short beep
Magazine empty/tray stack full:
2 short beeps
Error:
5 short beeps
To Next Page
Loading...
General